Struct Functionality

pub struct Functionality { /* private fields */ }

To determine what functionality is present

Implementations

impl Functionality

pub const I2C: Self = _

Plain i2c-level commands (I2C_RDWR)

Pure SMBus adapters typically can not do these.

pub const TENBIT_ADDR: Self = _

Handles the 10-bit address extensions

pub const PROTOCOL_MANGLING: Self = _

I2C_M_IGNORE_NAK etc.

pub const SMBUS_PEC: Self = _

pub const NO_START: Self = _

I2C_M_NOSTART

pub const SLAVE: Self = _

pub const SMBUS_BLOCK_PROC_CALL: Self = _

SMBus 2.0

pub const SMBUS_QUICK: Self = _

pub const SMBUS_READ_BYTE: Self = _

pub const SMBUS_WRITE_BYTE: Self = _

pub const SMBUS_READ_BYTE_DATA: Self = _

pub const SMBUS_WRITE_BYTE_DATA: Self = _

pub const SMBUS_READ_WORD_DATA: Self = _

pub const SMBUS_WRITE_WORD_DATA: Self = _

pub const SMBUS_PROC_CALL: Self = _

pub const SMBUS_READ_BLOCK_DATA: Self = _

pub const SMBUS_WRITE_BLOCK_DATA: Self = _

pub const SMBUS_READ_I2C_BLOCK: Self = _

I2C-like block xfer

pub const SMBUS_WRITE_I2C_BLOCK: Self = _

w/ 1-byte reg. addr.

pub const SMBUS_HOST_NOTIFY: Self = _

pub const SMBUS_BYTE: Self = _

pub const SMBUS_BYTE_DATA: Self = _

pub const SMBUS_WORD_DATA: Self = _

pub const SMBUS_BLOCK_DATA: Self = _

pub const SMBUS_I2C_BLOCK: Self = _

pub const SMBUS_EMUL: Self = _

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u32) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for Functionality

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for Functionality

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = Functionality

The resulting type after applying the & operator.

impl BitAndAssign for Functionality

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr for Functionality

fn bitor(self, other: Functionality) -> Self

Returns the union of the two sets of flags.

type Output = Functionality

The resulting type after applying the | operator.

impl BitOrAssign for Functionality

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor for Functionality

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = Functionality

The resulting type after applying the ^ operator.

impl BitXorAssign for Functionality

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for Functionality

fn clone(&self) -> Functionality

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Functionality

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<Functionality> for Functionality

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<Functionality> for Functionality

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for Functionality

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for Functionality

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for Functionality

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = Functionality

The resulting type after applying the ! operator.

impl Octal for Functionality

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for Functionality

fn cmp(&self, other: &Functionality) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for Functionality

fn eq(&self, other: &Functionality) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Functionality

fn partial_cmp(&self, other: &Functionality) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub for Functionality

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = Functionality

The resulting type after applying the - operator.

impl SubAssign for Functionality

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl UpperHex for Functionality

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for Functionality

impl Eq for Functionality

impl StructuralPartialEq for Functionality